CNC lathe machining refers to the requirements of machine tools for workshop aspects. CNC, also known as computer gongs, CNC machine tools, etc., is actually a term used in Hong Kong and later introduced to the Pearl River Delta in mainland China. It is a new machining technology that mainly involves creating machining programs, but also requires some experience in manual machining. So what are the requirements for CNC machining machines in the workshop? 1. Installation position requirements: The installation position of CNC machine tools should be far away from the vibration source, avoid direct sunlight and thermal radiation, and avoid the influence of moisture and airflow. If there is a vibration source near the machine tool, anti vibration grooves should be set up around the machine to...

What are the production planning and design standards for metal stamping processing? What are the production planning and design standards for analyzing metal stamping parts? In the production process of metal stamping parts, in order to ensure orderly production work, product quality, and reduce product defect rates, it is necessary to plan and establish design standards for the production of metal stamping parts. So, what are the specific production plans and design standards for metal stamping parts? Next, we will explain them to you. Firstly, planning for metal stamping production: a、 A strict inspection system should be established during production. The first piece of metal stamping parts produced daily must undergo a comprehensive inspection, and can only be put into production aft...

Maintenance precautions for metal stamping convex and concave molds. Many people know that in the production of metal stamping molds, it is necessary to maintain the machine and carefully inspect it in order to improve the mold life and production efficiency. 1. When disassembling convex and concave molds, attention should be paid to the original condition of the mold for easy restoration during subsequent mold installation; If there is padding or displacement, the thickness of the gasket should be engraved on the part and recorded. 2. When replacing the convex mold, it is necessary to test whether the insertion and removal block of the concave mold are smooth, and whether the gap between the insertion and the concave mold is uniform; When replacing the concave mold, it is also necessary t...